Loading...

Download center

Polytechs graphic design

DOWNLOAD CENTER

DOWNLOAD CLEAN HDPE DOCUMENTATION

CLEAN HDPE is suitable to use in injection moulding of styrenic (co)polymers, PMMA, polyolefin or hard PVC or extrusion of hoses, pipes, cables or profiles based on polyolefin, PVC, styrenic (co)polymers, PMMA or rubberlike resins as well as colour or additives master batch based on polyolefin carrier.

I accept to receive latests news about Clean Xpress, the purging step (only 1 per month).

I accept the conditions of use of Clean Xpress website.

DOWNLOAD CLEAN LDPE DOCUMENTATION

CLEAN LDPE is suitable to use in injection moulding of or extrusion of hoses, pipes, cables or profiles based on polyolefin, ethylene vinyl acetate copolymer, soft PVC as well as colour or additives master barches containing polyolefin carrier and powder coating.

I accept to receive latests news about Clean Xpress, the purging step (only 1 per month).

I accept the conditions of use of Clean Xpress website.

DOWNLOAD CLEAN PP DOCUMENTATION

CLEAN PP is suitable to use in injection moulding of polyolefin or hard PVC or extrusion of hoses, pipes, cables, profiles or fibers based on polyolefin as well as colour or additives master batches based on polyolefin carrier.

I accept to receive latests news about Clean Xpress, the purging step (only 1 per month).

I accept the conditions of use of Clean Xpress website.

DOWNLOAD CLEAN HP DOCUMENTATION

CLEAN HP is suitable to use in injection moulding of or extrusion of hoses, pipes, cables or profiles based on polyolefin, ethylene vinyl acetate copolymer, soft PVC as well as colour or additives masterbatches containing polyolefin carrier and powder coating.

I accept to receive latests news about Clean Xpress, the purging step (only 1 per month).

I accept the conditions of use of Clean Xpress website.

DOWNLOAD CONVERSION MODES DOCUMENTATION

I accept to receive latests news about Clean Xpress, the purging step (only 1 per month).

I accept the conditions of use of Clean Xpress website.